Home > Masonry Paint > WallGuard

WallGuard

Quick Drying Smooth Masonry Paint

  • 5 Litre
Clear

Description

Overview

This exterior wall paint is ideal for protecting and decorating dwellings such as houses, annexes, cottages and commercial properties looking for a pleasing and ecological protective coating

  • As a general guide between 30-60 square metres/15 litres (2-4 square metres/litre per coat) > Apply 2 coats
  • Smooth, high-performance water-based eco-friendly exterior wall coating for a long-lasting decorative finish that also protects and improves insulation.
  • Contains ceramic spheres to help reduce energy consumption by improving the insulating properties of your walls.Contains algicide and fungicide.
  • Hard wearing, long lasting, flexible and elastic – waterproof and water vapour permeable. Colours shown are approximate and for indication only.

Spreading Rate

  • As a general guide between 30-60 square metres/15 litres (2-4 square metres/litre per coat)
  • Apply 2 coats Dependent on nature of the substrate, temperature and application method.

Drying Time

  • Drying is by evaporation of water. 20°C/50% RH
  • To touch: 45 minutes
  • To handle: approximately 8 hours
  • To re-coat: 24 hours
  • Full hardness: approximately 2 days
  • Minimum temperature 5°C / Maximum 80% RH

Application

Application

Masonry paint can be applied by Brush, Roller or Spray. Coverage will be determined by the nature of the substrate, temperature and application method.

Roller Type – depends on surface type but a heavy pile is generally used for rough surfaces, a medium to short pile for smooth surfaces up to a maximum of a 12” roller.

 

WallGuard

  • 5 Litre
Clear

Description

Overview

This exterior wall paint is ideal for protecting and decorating dwellings such as houses, annexes, cottages and commercial properties looking for a pleasing and ecological protective coating

  • As a general guide between 30-60 square metres/15 litres (2-4 square metres/litre per coat) > Apply 2 coats
  • Smooth, high-performance water-based eco-friendly exterior wall coating for a long-lasting decorative finish that also protects and improves insulation.
  • Contains ceramic spheres to help reduce energy consumption by improving the insulating properties of your walls.Contains algicide and fungicide.
  • Hard wearing, long lasting, flexible and elastic – waterproof and water vapour permeable. Colours shown are approximate and for indication only.

Spreading Rate

  • As a general guide between 30-60 square metres/15 litres (2-4 square metres/litre per coat)
  • Apply 2 coats Dependent on nature of the substrate, temperature and application method.

Drying Time

  • Drying is by evaporation of water. 20°C/50% RH
  • To touch: 45 minutes
  • To handle: approximately 8 hours
  • To re-coat: 24 hours
  • Full hardness: approximately 2 days
  • Minimum temperature 5°C / Maximum 80% RH

Application

Application

Masonry paint can be applied by Brush, Roller or Spray. Coverage will be determined by the nature of the substrate, temperature and application method.

Roller Type – depends on surface type but a heavy pile is generally used for rough surfaces, a medium to short pile for smooth surfaces up to a maximum of a 12” roller.