For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment.
High performance: Hard wearing solvent based Polyurethane coating for concrete and stone
Chemical Resistant: Resistant to many industrial chemicals and regular washing with water
Home & Garage Floor Paint: For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Not recommended for use on Bitumen or Asphalt
Spreading Rate: Up to 60 square metres per 5 litre, dependent on substrate
Mid-sheen Finish: Grey mid-sheen finish
Application & Info
Up to 60 square metres per 5 litre, dependent on substrate.
Touch dry in 2-4 hours, dependent on ambient temperature, minimum over coating time of 16-24 hours.
NOTE: Low temperatures can significantly extend the drying time.
Up to 2 years if stored correctly in an unopened container.
All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.
New concrete should be allowed to mature for a minimum of 6 months before paint can be applied.
Chemically or mechanically hardened floors may need abrasion, prior to application.
If in doubt always test a small area prior to use.
- Stir well before use
- Supplied ready for use, Brush or Roller may apply
- Polar Floor Paint. Coverage will vary dependent on the nature and porosity of the substrate and the application method.
- Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry.
- Polar Floor Paint is touch dry in 2-4 hours dependent on ambient temperature.