Polar Coatings
Polar Heavy-Duty WallGuard Paint
- Regular price
-
£55.99 - Sale price
-
£55.99
-
Hurry, only 9 items left in stock!
Couldn't load pickup availability
30 DAYS FREE RETURNS
Product Details
HIGH-QUALITY COATING - Water-based formula that delivers a heavy-duty, durable finish on exterior walls. Top of the range, contractor-quality paint that is consumer-friendly and easy to apply.
EXTERIOR WALL GUARD - High-performance coating that provides a tough and waterproof exterior finish in just one coat. It provides a decorative finish that improves performance and insulation. Application of two coats may be required, depending on the surface application.
MULTI-PURPOSE USE - Specially formulated for application on exterior home wall surfaces to give a smooth matt finish. Suitable to be applied on a variety of surfaces, including; concrete, brick, stone, pebbledash, ironwork, masonry or cement.
EASY TO APPLY - The low odour and fast-drying solution makes refreshing exterior walls a breeze. Powerwash the surface if required and repair any minor crack. For optimal coverage and performance results apply using a brush - 5 Litres covers up to 80㎡. Touch dry in 1-2 hours - apply a second coat after 4-6 if needed.
ATTRACTIVE SMOOTH FINISH - Delivers a heavy-duty and hard-wearing finish to exterior home surfaces. Rich and smooth finish in a variety of colours that will keep your home looking refreshed and new.
Coverage Calculator
How Much Do I Need?
You will need
litres
Use For The Following Surface Types
Technical Specifications
| Interior/Exterior | Exterior |
|---|---|
| Number of Coats | Two |
| Coverage | 1 Litre covers up to 11m² 2.5 Litres covers up to 27.5m² 5 Litres covers up to 55m² |
| Dry Time | Touch Dry: 1-2 hours. To Re-coat: 4-6 hours |
| Colours | White, Anthracite & Black |
| Application | Brush or Roller |
| Application Temperature | Above 10°C |
| Paint Base | Water |
| Size | 1 Litre 2.5 Litres 5 Litres |
Application
Preparation
Power washing the surface and then coated with a Fungicidal Wash to remove moss.
Ensure the surface is clean, dry and free from free from dirt, grease, oil, dust, chalk and friable material.
Hairline cracks can be successfully covered but substantial cracks should be filled with a sealant.
Application
Apply with a Brush or Roller.
1 coat may be sufficient but 2 coats are recommended.
Apply an even coat.
Coverage will be determined by the nature of the substrate, temperature and application method.
Finishing Up
Apply a second coat after a minimum of 4-6 hours.
Drying time can be extended at lower temperatures.
Clean all brushes and equipment with water after use.
Keeps for up to 12 months if stored correctly in an unopened container.